DIY

Remove Product Buildup From Hair Tools With This Easy Cleaning Hack

Hairspray be gone.

Posted on

Supplies:

Hair dryer

Flat iron

Curling iron

Baking soda

Rubbing alcohol

Old toothbrush

Hot soapy water

Instructions:

Hair Dryer

1. Figure out how to open the back of your hair dryer. Some twist open, some pop open with a hinge, and some need to be unscrewed. The filters need to be cleaned once every few months, depending on use. Not cleaning the filter is the primary reason hair dryers break prematurely.

2. Wipe off dust and dirt, then rinse in hot soapy water. Let the filters dry completely before carefully replacing them in your hair dryer.

Curling/Flat Iron

1. Hair styling products can collect on your hot tools over time, causing a burnt buildup that looks like rust. Create an easy gunk-remover with one part rubbing alcohol and two parts baking soda.

2. Turn on your hot tools for about a minute, then turn off and unplug. The heat will help loosen the gunk.

3. Wipe the paste over the surface of your hot tools, and let sit for 15 minutes.

4. If you have ceramic-plated tools, use only your fingers to rub away the buildup. For metal, use a soft cloth or toothbrush.

5. Wipe off the residue, and enjoy your fresh clean tools!

Follow BuzzFeed’s Nifty on Facebook for more mind-blowing hacks and DIYs.