back to top
Community

DIY Grumpy Cat Clock

Let the Cats tell the time.

Posted on

View this video on YouTube

youtube.com

Step 1

Apply glue evenly to the back of picture.

Apply glue evenly to the back of picture.

Step 2

Place picture carefully onto poster board. Take your hand sliding it evenly across the picture pushing out any air bubbles. Allow picture a few minutes to dry to the poster board.

Place picture carefully onto poster board. Take your hand sliding it evenly across the picture pushing out any air bubbles. Allow picture a few minutes to dry to the poster board.

Step 3

Paint Clock hands with desired color. Apply two coats of paint.

Paint Clock hands with desired color. Apply two coats of paint.

Step 4

Carefully cut along tracing the edge of the picture. You may have to cut along the same path a few times to evenly cut all the way through the poster board.

Carefully cut along tracing the edge of the picture. You may have to cut along the same path a few times to evenly cut all the way through the poster board.

Step 5

Gently remove the cut out section from the poster board. Do this slowly and check for any spots that may have missed the knife.

Gently remove the cut out section from the poster board. Do this slowly and check for any spots that may have missed the knife.

Step 6

Sand off any rough jagged edges.

Sand off any rough jagged edges.

Step 7

Lay your clock mechanism on your picture and measure to the center and make a mark.

Lay your clock mechanism on your picture and measure to the center and make a mark.

Step 8

Carefully drill a hole that is the same size as the center of the clock.

Carefully drill a hole that is the same size as the center of the clock.

Step 9

The hole may have a few loose papers, clean those up with your exacto knife.

The hole may have a few loose papers, clean those up with your exacto knife.

Step 10

Apply hot glue to the back of the poster board and quickly slide your clock mechanism in place. Make sure that the clock is right side up.

Apply hot glue to the back of the poster board and quickly slide your clock mechanism in place. Make sure that the clock is right side up.

Step 11

Attach your clock hands and screw them into place.

Attach your clock hands and screw them into place.

Step 12

Apply sticks to 12, 3, 6, and 9 on the clock to help tell time a little easier.

Apply sticks to 12, 3, 6, and 9 on the clock to help tell time a little easier.

Now there's a clock that tells the Purrfect time.

Top trending videos

Watch more BuzzFeed Video Caret right