back to top
Community

How You Can Fix The Headphone Jack With An iPhone

Sometimes, your headphone jack just can't work. You may use a iphone to help, it will solve the problem quickly, let's check the how-to steps below!

Posted on

Restart your iPhone. A software glitch may cause your iPhone to mute itself. However, a hard restart can deal with this issue. To restart your phone, hold lower the ability button on the top of the phone's casing after which swipe the slide to turn off switch towards the top of the screen right. Following a minute, press and contain the Power button again before the white-colored apple icon seems on your iPhone's screen.

If you are utilizing an Apple iPhone 5 or older, the ability button is on the top from the phone.

Switch off your iPhone's Bluetooth. Getting Bluetooth on while not linked to a tool (e.g., a car's stereo or headphones) can mute your iPhone's audio. To disable Bluetooth, swipe up from the foot of the screen and tap nowhere Bluetooth circle right from the Wi-Fi icon.

If swiping up opens the background music control tab, swipe to see the Bluetooth icon.

When the Bluetooth icon is gray instead of blue, your iPhone's Bluetooth has already been disabled.

Lift up your iPhone's playback volume. The issue might be around your iPhone's music volume and never your headphone jack. To alter playback volume, swipe up from the foot of the screen to spread out the Control Center, swipe left to gain access to the background music section, and drag the slider at the end of the page to boost the volume.

Your Control Center may be available to the background music section.

Only use Apple headphones or Bluetooth headphones. Third-party headphones (e.g., any plug-in headphones that did not originate from Apple) may cause the iPhone's headphone jack to jam and go to town headphones mode. This issue is fixable either by utilizing Apple headphones or by staying away from plug-in headphones entirely.

Avoid crimping or bending your headphones while they are connected. Bending your plugged-in headphones boosts the chances the headphone plug will discontinue within the headphone jack.

For instance, if you hear music together with your iPhone in your wallet, put your iPhone, so the headphone jack is facing up.

Store your iPhone inside a clean, dry place. To prevent moisture or grit build-in your iPhone, don't let it rest in places where dust, dirt, or moisture may accumulate (e.g., the console of the vehicle or within your desk drawer).

To get rid of grit or moisture, use a can of compressed air or perhaps a blow dryer on low correspondingly.

Frequently occasions, iPhones stuck in headphone mode are merely struggling with a grimy headphone jack.

Switch off your iPhone. To do this, hold lower the ability button along the side of your phone's casing after which swipe the slide to turn off switch towards the top of the screen right.

If you are utilizing an Apple iPhone 5 or older, the ability button is on the top from the phone.

Get a Q-tip. Once dust or grit accumulates inside your headphone jack, it may cause lots of problems, for example, having your iPhone's audio stuck on headphones mode or making your headphones malfunction use a Q-tip to get rid of this build-up.

If you are utilizing an iPhone 7, you will need to cut the very best 75 % approximately from the Q-tip so that it can squeeze into the lightning port at the end of the phone.

Insert the Q-tip into the headphone jack. Achieve this lightly, without forcing the Q-tip.

Twirl the Q-tip, then take it off. Doing this should remove a few of the dust or dirt out of your headphone jack.

You might want to continue doing this process several occasions before your iPhone's headphone jack is clean.Make use of a situation in your iPhone. Not simply will getting a situation in your iPhone safeguard it from impact damage, it will likewise boost the space between your iPhone's bottom and also the surface which it rests. This can decrease the likelihood of lint and dirt winding up inside your iPhone.

Switch off your iPhone. To do this, hold lower the ability button along the side of your phone's casing after which swipe the slide to turn off switch towards the top of the screen right.

If you are utilizing an Apple iPhone 5 or older, the ability button is on the top from the phone.

Insert your tool into the headphone jack. Achieve this at because a position as you possibly can, instead of jamming your tool upright into the jack--otherwise, you risk damaging the jack further.

Scrape lightly the item stuck inside your headphone jack. If certificates, some lint, or perhaps an otherwise soft object is lodged inside your headphone jack, you can coax it by repeating this gesture until it eases from the jack.

Take care not to apply lots of pressure towards the sides of the iPhone's headphone jack.

You may also try wrapping a bit of double-sided tape around your resist better capture the item.

Make use of a medium-sized straw to get rid of a bit of headphone plug. In case your headphone plug broke within the iPhone, you can insert a straw around it and lightly pry the plug out. Doing this far less prone to harm your iPhone's headphone jack than using needle nose pliers or tweezers.

Bring your iPhone right into a shop to have it fixed. Discover in a position to take away the lodged object without causing harm to your iPhone, taking it right into a Best To Buy tech department or perhaps an Apple store will probably prove less expensive than replacing the now-damaged headphone jack entirely.

This post was created by a member of BuzzFeed Community, where anyone can post awesome lists and creations. Learn more or post your buzz!